Moody 27

Moody (GB), Segelyacht, Gebrauchtyacht, GB Ardrossan

€ 11.703,-
EU versteuert - nein, MwSt. exklusiv

Gebot abgeben Empfehlen Merken Merken Drucken

Baujahr: 1983

Erstwasserung: 0

Länge: 8,43 m

Breite: 2,95 m

Tiefgang: 1.0400

Gewicht: 2608.000 kg

Motortyp: 1 x Volvo MD7B

Motoranzahl: 1

Kraftstoffart: Diesel

PS/kW: 17 / 13

Kraftstoff: 61 l

WC/Nasszelle: 0

Keine Angaben vorhanden

Moody 27 Ever popular Bill Dixon design with a fast hull and bilge keels with excellent ballast ratio to make her both stiff and seaworthy,

The Moody 27 has good head room for her size and has a well planned and practical layout with a vast amount of storage space.. There is seating for 6 at the saloon table.

Ceegen has had a resent Raymarine Dragonfly Chartplotter fitted and also new tiller pilot.

Construction

The Moody 27 was introduced in 1981, and was the predecessor of the 1985 Moody 28.

The two designs have many similarities: the main difference being that the 27 has an stern hung rudder.

Bilge keels allowing of drying out in shallow anchorages.

4 years ago a full international Epoxy treatment for osmosis was completed with 4 coats Epoxy applied.

Aluminum toe rails incorporating stanchion bases, fairleads, stainless steel pulpit & pushpit, stainless steel transom boarding ladder.

Mechanicals

Engine

Volvo MD7B 2 cylinder 17 hp Diesel

Shaft Driven 3 bladed fixed prop

Engine serviced by owner each year.

Electrical

12 volt System powered by 2 x 90amp batteries (replace 2020)

Charged by engine Alternator

Shore power with cable

Water System

Hand pump to both basins

Tankage

Diesel tank 61 Litres made from Steel

Water Tank 57 Litres Made form GRP

Mast, Rigging and Sails

Mast and Boom

Alloy Single Spreader masthead Spar.

Slab reefing Mainsail

Plastimo Furling Genoa Unit

Standing Rigging age unknown

Spinnaker Pole

Sails

Genoa by Jeckells New 2022

Mainsail By Jeckells New 2020

Storm Jib

Accommodation

5 berths in 2 cabins.
Forecabin has V-berth with insert. Wardrobe & cupboard storage. Double doors separate forecabin from saloon.

Saloon: Port and starboard berth in saloon

Large hinged table in center of saloon with drinks storage locker in center. Large lockers under all berths and plenty of cave lockers to port/starboard. Good shelving over each saloon berth as well as several storage lockers.

Large quarter berth to starboard.

Heads: Separate heads compartment with marine toilet, basin with manual cold water and wet locker

Navigation area incorporates a neat foldable nav table on portside.

Galley: L shaped galley area with New Dometic gimballed gas cooker with 2 gas burners, grill & separate oven. Stainless steel sink with manual cold water. Large cool box. Galley storage under sink, under cooker, above cooker and work surface.

Inventory

Navigation

New Plastimo Ships Compass

Nasa Clipper Depth Sounder

Nasa Clipper Wind Instrument New Masthead transducer not fitted.

Raymarine Dragonfly Chartplotter

New Autohelm Tiller pilot

Mooring and Anchoring

6 Fenders and full complement of warps

Plough Anchor with Chain and warp

Boathook

General

Boarding ladder

Dodgers

Sprayhood

Navigation light

New Electric and manual bilge pumps

Fire Blanket

Life Ring

New Avon Hybolon Dinghy

Features

Compass
Electric bilge pump
Storm jib
Shore power inlet
Vhf
Tender
Wind speed and direction
Oven
Plotter
Gps
Marine head
Spray hood
Furling genoa
Tiller
Autopilot
Depthsounder
Manual bilge pump
Mainsail cover
Battened mainsail

In this case we are acting as brokers only. The Vendor is not selling in the course of a business. Whilst every care has been taken in their preparation, the correctness of these particulars is not guaranteed. The particulars are intended only as a guide and they do not constitute a term of any contract. A prospective buyer is strongly advised to check the particulars and where appropriate at his own expense to employ a qualified Marine Surveyor to carry out a survey and / or to have an engine trial conducted, which if carried out by us shall not imply any liability for such engine on our part.

Note to seller and purchaser: If the boat you are selling or purchasing is registered, please ensure that the registration is completed after the sale of the boat. If the purchaser wishes to cancel the registration is the duty of the seller to contact the Registry and inform them that the registration is to be cancelled. If the purchaser wishes to continue with the registration, it is the duty of the purchaser to complete the relevant forms and post off the bill of sale to the Registrar.